Generic Name: Stenbolone (as Acetate)
Brand: Anatrofin (o.c.) (Mex) 100 mg/ml
Effective dose: 50-100 mg daily to every other day injections
Available Doses: 25, 50 and 100 mg/ml amps
In 1963 Syntex first marketed Stenbolone acetate. However, despite its substantial popularity, it has been discontinued for almost 15 years. It’s somehow strange that most popular steroids tend to disappear around that particular time.
Previously, Syntex also marketed oxymetholone. However, it needs high doses of oxymetholone and causes problems with excessive gyno, bloating, and liver toxicity due to its poor androgenic properties.
To improve this complication, Stenbolone was formulated by Syntex. The drug was mistakenly termed injectable Anadrol by many users. However, this steroid is as different as day and night (common mistakes were made with Anavar and Searle’s Never.) Now you have a question what is Anatropin used for?
Stenbolone is closely similar to the steroid Primobolan or methenolone, and the only difference is that instead of a 1-methyl group, it has a 2-methyl group. There is a difference between discrete mesterolone (Proviron) and drostanolone (Masteron). When it comes to characteristics, it has few changes, and one can even assume that stenbolone has the same effects as methenolone. It has a 5-alpha reduced version of boldenone as it contains a 5-alpha-structure. It means that stenbolone does not aromatize when you use with estrogen and does not cause gynecomastia (development of breast tissue in men) and bloating problems during water retention.
This characteristic of stenbolone had solved the first problem; however, simultaneously, the 1, 2-double bonds linked in its structure made the steroid-less androgenic compared to a 5-alpha-reduced steroid. If you compare to boldenone which is half androgenic as testosterone, stenbolone is also half androgenic as Dihydrotestosterone, another version of testosterone that is 5-alpha-reduced.
This supports the fact that it does not cause any androgenic problems to users to some great extent as it does not any cause estrogenic problems at all. This means that users could have less worry about prostate hypertrophy, acne, hair loss and deepening of the voice that he or she would have with testosterone.
Maybe now, you are curious about what exactly the difference between stenbolone and Primobolan or methenolone, well actually there isn’t one. The only one acting to increase oral activity is the 1-methyl group, but since there is no oral form of stenbolone sold in the market, that point is mediocre. This means that the 1-methyl group has no real purpose to any injectable form of Primobolan or methenolone, therefore they are the same.
In some presumptions, the addition of 2-methyl group on stenbolone can be similar to that of drostanolone, to improve stability and androgenic binding and protect 3-keto group. However, the alternation or the changes are considered useless.
The major reason why stenbolone and methenolone have decreased their androgenic activity is the 1,2-double bond, however, the same double bond can also keep it from being deactivated by 3a-hydroxysteroid dehydrogenase enzyme which most likely the same to Dihydrotestosterone (drostanolone is 2-methyl-DHT) case. This fact concludes that a 2-monthly change is minimal at best.
When it comes to characteristics there isn’t any difference between injectable stenbolone and methenolone. The only relevance is that stenbolone is exclusively made as acetate ester similar to injectable methenolone which is only made as enanthate ester.
This means that upon users’ methenolone injection it can stay alive longer and once a week injection could suffice for appropriate impact or action. Whilst, stenbolone’s acetate ester can last for two days only at best and must be injected regularly for effective results. Which are why, many users prefer methenolone enanthate than stenbolone acetate.
Shorter ester usually used for longer prior to their competition time and it needs less time only to clear the urine and the blood. By the time drug testing became popular, stenbolone disappeared off the market and this was the oddest fact ever. Stenbolone was mainly used as a base compound during cutting cycles because it is non-aromatizing and mild. To athletes’ stenbolone is an effective anti-catabolic that allow them to maintain their mass while keeping a hardcore diet.
This type of steroid made a good match with other known steroids like trenbolone(Finaplix, during its time Parabolan was still available in the market) and stanozolol (Winstrol) that served the same purpose or advantage.
When one user use Nandrolone (Laurabolin, Deca-Durabolin) during their mass phase cycle, most likely they also use methenolone and stenbolone during cutting phases. With its mild nature and non-aromatizing characteristics, many female users prefer to use stenbolone steroids.
Click on the Banner Below to get Best Steroids Legally:-
Proper Stacking and Use:
Since stenbolone is a non-aromatizing injectable typically male users use around 50 mg daily and around 350 mg for the whole week. To some extent, strong competitors went as high as 100mg/ml amps stenbolone injection daily, totaling 700 mg in one week.
This steroid is rarely used alone and is always accompanied with other non-aromatizing or mild compounds in the cutting cycle such as stanozolol (Stromba/Winstrol) and oxandrolone (Anavar) at 30 to 50 mg daily. Furthermore, an individual can use stenbolone as a base steroid for methandrostenolone (Dianabol), testosterone and oxymetholone (Anadrol) for gaining mass purposes.
Commonly, athletes prefer Primobolan depot, a longer-acting compound, for gaining mass effectively and it is more convenient since stenbolone is now extinct whilst Primobolan is still made. It has been proven and tested that use of stenbolone is very minimal. Because of its incapability in developing estrogen, no anti-estrogens are needed.
Stenbolone is a controllable androgen and very mild because of its short ester and there are no real precautions to expect of. When the product gives you the problem, all you have to do is simply stop using. Also, use of Clomid or Nolvadex during post-cycle in a short period of time is required but must be used limitedly. For longest cycle like 10 weeks or more, the user may consider longer Nolvadex or Clomid therapy and or be using HCG to bring testosterone back to normal faster.
injecting 25-50 mg every other day of stenbolone will definitely suffice for
good results. Female users are always advised to consider using anti-androgen
steroid like spironolactone to prevent virilizing symptoms.
What are the Primary Ingredients of Anatropin?
The very main ingredients of Anatropin are zinc and D3 which effectively acts in keeping testosterone at their optimum levels. According to the manufacturer, “companies are still trying to push Tribulus based products, while human research clearly suggests they have no effect on androgen levels in men”, which is why most testosterone boosters contain no Anatropin.
The Mechanism of Work:
“It is apparently time for you to reign supreme over estrogen and support optimal testosterone levels” according to the manufacturer. Anatropin is best known as “blockbuster hormonal support innovation”, which sounds impressive and amazing to a novice.
However, for users who have more experience with different steroids and supplements for bodybuilding specifically testosterone boosting supplements, you’ll definitely know that there’s more of “hot air” out there. According to manufacturers, this type of product can effectively enhance and boost the levels of your testosterone while control estrogen and at the same time suppress it.
Gaspari was the one who made Anatropin products and according to them, it is used as “cutting edge science” to provide and help you with effective results which can be seen and felt either looking in front of the mirror or playing in the field. The formulation was brought up in accordance to its “real scientific evidence and real clinical research for real people”, however no advance elaboration in this matter.