Connect with us

Anabolic Steroids

Top 10 Best China Powder Steroid Suppliers (Updated)

Published

on

China has become the last year the first source of steroids. There are no signs that it will cease in the first place anytime soon. It supplies AAS worldwide, with the most significant share for the but also in all other European countries and Russia.

Those who use homebrew steroids would like to know what powder suppliers from China can be trusted. One of many of them provides natural cosmetics and which one is better to avoid. We have something to say and will develop the idea in the paragraphs below.  

After researching what people say on various forums - is it ok to reveal suppliers' names and addresses and transfer them by this way a capital of trust - we concluded that you should always take any information available with a pinch of salt.

Read, get informed, check others' opinions, and look for dealer reviews, but at the end of the day, you decide whom you will try. For a better-informed one, please check where to find good steroid suppliers or six signs to verify if a steroid is fake.

When China Became The Biggest Supplier?

Until 2005, Mexico was the largest AAS supplier for the US market, but all changed after Gear Grinder's operation. Eight of the most popular steroid suppliers have been liquidated, freeing the AAS market.

Chinese suppliers took over with hundreds of manufacturers of raw steroid powders and ready-for-use gear, supplying a wide range of products, but not all of them of the highest quality. And here we come to the point of discussing what China’s powder steroid suppliers that worth your money and time.

It’s quite a difficult task because of the high rate of counterfeiting popular products. It means that even if you are buying a product that is said to be produced by a legit manufacturer, you can never be sure of this until you try it and see it working.

After googling a bit on China's steroid suppliers, you will get two primary sources that show you the whole picture of the raw powder manufacturers in China. These sources are Alibaba and Made-in-China.com, with hundreds of results based on China's largest cities.

Three Main Factors to Pay Attention to

  • Is it or not an audited supplier?
  • Does the manufacturer has a license, and is it verified?
  • Trade assurance - will the powder be supplied on time?

An audited supplier means a professional verification company checks, such as SGS, Bureau Veritas, TÜV SÜD, or CCIC. As a result, the audited company has passed the onsite evaluation, product, and certification verification and is allowed to produce gear according to China law.

An audit report reveals the company name,  the number of employees, year of establishment, registered capital, list of products, and onsite photo. Regarding the year of establishment, the older a company is, the better the chances it’s trustworthy.

Being in business longer is a sign that they are doing things right. At least, it should be so. Conversely, you should be warned by a company with less than one-year history and double-check before ordering with them.

With all this in mind, let’s see what are 10 of the most common China raw steroid powders suppliers according to Made-in-China.com.

Related Article: How much does it cost to make your steroid brand?

How to cook your steroid:

Please don't do this if you are not an expert or don't have a unique certified laboratory. 

Most Chinese suppliers can offer semi-finished steroids, which means they can deliver the oil to you, and you can filter it after making the finished steroid vials. They can even provide bottles, caps, jars, labels, etc.

TOP 10 China STEROIDS RAW POWDER SUPPLIERS 2022

#1. Numei Bio-Tech Co., Ltd:

 Their official website is Oneraw.net, China's first-class steroid raw material supplier, also known as China's steroids No.1. They also guarantee 100% delivery door to door and have enough stocks in Canada, the United States, and Europe. To provide domestic delivery service to customers, which is hard to achieve for many other suppliers.
Their main products include Testosterone Steroid Powder, Nandrolone Powder, Trenbolone Powder, Boldenone Steroids, Sex Hormones, SARMs Powder, Peptides, HGH, etc. It is a comprehensive supplier owning various kinds of products, and the purity of all products is over 98%. Maybe they are the supplier you need.

#2. Crazy Steroids:

This Supplier of Pharmaceutical Grade Steroids Powders and SARMs Raws is located in Hong Kong and has been approved by many online forums. The company has been in business for many years and got rich experience in shipping, offering AUS, EU, Canada, and USA re-mailer services,  that can help you solve customs "troubles."
  • Steroids Powders: Testosterones Powders, Nandrolone Powders, Boldenone Raws, Masteron Powders, Anavar / Dbol / Anadrol / Winstrol / Arimidex / Letrozole / Viagra / Cialis.
  • SARMs Raws: MK-677, MK-2866, GW-501516, LGD-4033, LGD-3033, SR-9009, RAD-140, YK-11, S-23, S-4
  • Research Raws: Trestolone Acetate, Trestolone Decanoate, Trestolone Enanthate, Dienolone Acetate, MKC-231, Desoxy-T Acetate, Phera-Plex.

#3. Shenzhen Shijingu Technology Co., Ltd:

Founded in 2005, they claim to produce 99% purity Trenbolone Acetate, Testosterone,  Oxandrolone (Anavar), Nandrolone Decanoate, powders and successfully distributed in Europe, Asia, the US, and Africa and there you will find all the information about prices, shipping conditions and anything you might want to know about them.

#4. Landmark Nutraceuticals Co., Ltd:

 The official website is landmarkchem.com, and according to them, this is an innovative company with over ten years of experience producing and delivering raw steroid powders anywhere in the world. They manufacture all forms of Testosterone powders (Testosterone Isocaproate, Enanthate, Decanoate, Cypionate, Acetate), 17a-Methyl-Drostanolone, Boldenone Undecylenate and Cypionate, Nandrolone esters and many others.

#5. Kafen Biotech Co., Ltd. Guangzhou:

Created in 2002, they say that it specialized mainly in producing and distributing pharmaceutical raw materials, including AAS. The company has profiles on large China online selling platforms, but we couldn’t locate their website address.

Regarding the variety of steroid powders they offer for sale, it covers almost every gear you know about. You can check the company profile on Alibaba too.

#6. Jinan Jia Ge Biological Technology Co., Ltd:

Located in Jinan, Shandong Province, this company says they have more than ten years of experience in producing. Not only raw powders but injectables, orals, and SERMs too. The official website address is www.legitanabolicsteroids.com

If you have experience with this supplier, share your thoughts with us. Via the website mentioned above, you can request a sample from them of any raw powders they produce: Trenbolone, Nandrolone, Deca-Durabolin, Halotestin, and others.

#7. Wuhan Shu Mai Technology Co., Ltd:

Established in 1999, they claim to offer powders of the highest quality worldwide ( information stated in the company description on Made-in-China.com). Among the explosives, they can provide Oxandrolone, Testosterone, Winstrol, Stanozolol, Dianabol, Winstrol, Trenbolone, and others.

We didn’t find their website address, which could be an alarming sign. I know it; please share it with us in the comments below.

#8. Hongkong Yuancheng Saichuang Technology Co., Ltd:

Gold member of the Made-in-China community since 2014, with a  wide range of raw powders to choose from - Trenbolone Acetate and  Enanthate, Testosterone Phenylpropionate, Enanthate or Propionate, Deca, and many others.

No official website is mentioned in the company description, but it has excellent visibility online. It is being presented on various platforms featuring pharmaceutical companies from China.

#9. Hongkong Blue Universal Technology Co., Ltd:

No official website indicated in the about company section, but, as they claim, they have a large share of the raw powders market in China. Most popular natural powders can order from this supplier via the Made-in-China contact chat. However, the wise idea is to ask for a free sample before purchasing bulk.

#10. Huge Raw Group Ltd:

Their website address is hugeraw.com, and they claim to be the biggest steroid powder provider from China that meets GMP standards, with all products of the highest purity of 99,7+. We can not assure you that this is true, but judging by the availability of licenses. The ISO 9001 certification and the fact that it’s an audited one. Also, it seems to be a supplier that might be what you need.

Powders supplied: All the range of steroid powders, with the most famous. Being with Testosterone, Stanozolol (Winstrol), Deca -Durabolin (Nandrolone), Dianabol, Sustanon, and others. You can check all the products along with prices on their website.

Related Article: Steps to Make Your Steroid at Home

Conclusion:

Please note that beyond the Chinese steroid powder suppliers mentioned above. There are dozens of others you can find by googling away.

Also, we can not say that by ordering with these Chinese suppliers. You will not be disappointed with the quality of the powder you will get. It’s always risky, and it’s better to stay off if you care about your health and money.

Comments

Anabolic Steroids

Joint Stiffness: How to Manage It While on AAS

Published

on

By

Joint stiffness is a common issue in steroids bodybuilding and the use of androgenic anabolic steroids (AAS). Here's how it happens and what it involves:

AAS Mechanism of Action

Anabolic-androgenic steroids (AAS) work by enhancing muscle growth and strength. They enlarge muscle cells through hypertrophy, leading to increased muscle mass.

Activation of Androgen Receptors (AR)

    • AAS, including those produced naturally (such as testosterone and dihydrotestosterone), bind to and activate the androgen receptor (AR).
    • The AR is present in various tissues throughout the body.

Androgenic and Anabolic Effects

AAS effects can be categorized into:

Androgenic: These relate to the development and maintenance of male sexual characteristics.

Anabolic: These involve increasing bone density, muscle mass, and strength.

Impairment of Testosterone Biosynthesis

    • In supraphysiological doses, AAS can impair testosterone biosynthesis in tissues.
    • This disruption occurs due to their interaction with AR signaling.

How AAS Contribute to Joint Stiffness

Water Retention and Electrolyte Imbalance

    • AAS can cause water retention, leading to increased fluid in the joint spaces. While this might initially seem beneficial, it can lead to stiffness if the excess fluid disrupts normal joint function.
    • Electrolyte imbalances caused by AAS can affect muscle and joint function, contributing to stiffness.

Changes in Collagen Synthesis

    • AAS can affect the synthesis and degradation of collagen, a primary component of connective tissue. This can lead to a decrease in the elasticity and resilience of tendons and ligaments, making joints feel stiffer.

Increased Muscle Mass

    • Rapid gains in muscle mass can place additional stress on joints, which may not have time to adapt, resulting in stiffness and discomfort.

Altered Pain Perception

    • Some AAS can alter pain perception and inflammatory responses, potentially masking injuries or causing changes in how the body responds to minor joint stresses, leading to stiffness.

Which Specific AAS Mainly Cause Joint Stiffness?

While not all anabolic-androgenic steroids (AAS) exhibit these adverse effects, certain ones are more prone to causing them. These include:

  1. Winstrol
  2. Masteron
  3. Proviron
  4. Halotestin
  5. Trenbolone

Additionally, high doses of testosterone, Dianabol, and Trestolone may also carry similar risks.

Dealing With Joint Stiffness Caused By AAS

Most AAS are dry compounds known for causing joint dryness. Some are usually wet compounds, which can lead to joint problems when taken in high doses without an aromatase inhibitor (AI), resulting in excess water retention that affects the joints.

Other AAS either have a neutral impact on the joints or enhance their strength and healing by boosting collagen production, with Nandrolone being a prime example.

To prevent joint issues when using wet AAS compounds, it is essential to use the appropriate AI dose (not too high) to manage estradiol levels and prevent excessive water retention.

Must Read: Anavar Cycle for Men and Women

For dry compounds, follow these guidelines to avoid joint issues:

Selective Testosterone Use

Ensure the use of a Testosterone and steroids bodybuilding base to achieve adequate estradiol conversion. While excess estradiol can cause water retention and joint damage, having the right amount is crucial for joint strength and lubrication.

Proper Gym Training

Exercise caution in the gym. Continuously pursuing personal records and lifting the heaviest weights can damage joints and cause injuries. Proper stretching and warming up with lighter weights are vital.

Supplements

Supplement with joint health supplements. Fish Oil at 6g daily or Krill Oil at 3g daily is essential for every AAS user. Additionally, taking MSM (Methylsulfonylmethane) at 1g daily and a few tablespoons of Collagen Powder daily will significantly benefit joint health.

Managing Other Forms of Joint Stiffness

Proper Warm-Up and Cool-Down

Engaging in thorough warm-up routines before workouts and adequate cool-down exercises afterward can help maintain joint flexibility.

Hydration and Nutrition

Staying well-hydrated and maintaining a balanced diet rich in essential nutrients like omega-3 fatty acids, glucosamine, and chondroitin can support joint health.

Supplementation

Using joint support supplements such as glucosamine, chondroitin, and MSM (methylsulfonylmethane) may help alleviate stiffness.

Monitoring and Adjusting Steroid Use

Careful monitoring of AAS dosages and cycles, under the guidance of a healthcare professional, can help minimize negative effects on joint health.

Rest and Recovery

Ensuring adequate rest and incorporating rest days into training routines can help prevent overuse injuries and joint stiffness.

Physical Therapy

Engaging in physical therapy or specific joint mobility exercises can improve joint function and reduce stiffness.

Long-Term Considerations

It's important to be aware that chronic use of AAS can lead to long-term joint issues. Regular check-ups with a healthcare provider, including monitoring of joint health, are crucial for those using AAS over extended periods. Recognizing the signs of joint problems early and taking proactive measures can help mitigate the risk of long-term damage.

Where to Buy AAS Online

Buying legitimate androgenic anabolic steroids (AAS) online can be challenging and carries significant legal, health, and ethical risks. However, if someone decides to proceed, here are some general tips on where to buy and how to check the quality:

Buy Tresiba by Novo Nordisk

Licensed Pharmacies (Where Legal)

In some countries, AAS can be purchased legally with a prescription from licensed pharmacies. Ensure to follow local regulations and obtain a valid prescription.

Reputable Online Retailers

Look for well-known, established online retailers with positive reviews and verified customer feedback. Forums, bodybuilding communities, and social media can provide recommendations.

Research Chemical Companies

Some companies sell research chemicals, including AAS, for "research purposes." Ensure these companies have good reputations and offer transparency about their products.

How to Check Good Quality

Third-Party Lab Testing

The best way to verify the quality of AAS and steroids bodybuilding is through third-party lab testing. Reputable sellers often provide lab reports or certificates of analysis that verify the purity and potency of their products.

Reviews and Testimonials

Check reviews on bodybuilding forums, websites, and social media platforms. Look for consistent positive feedback about product effectiveness, safety, and customer service.

Batch Numbers and Serialization

Legitimate products usually have batch numbers, expiration dates, and sometimes serialization. You can often verify these details through the manufacturer's website.

Packaging and Labels

Examine the packaging and labels for professionalism and accuracy. Poorly printed labels, misspellings, and low-quality packaging are red flags.

Customer Service

Good suppliers will have responsive and knowledgeable customer service. Ask questions about their products, sourcing, and testing procedures to gauge their reliability.

Price Comparison

If the price seems too good to be true, it probably is. Compare prices with other reputable sources to ensure you're not buying counterfeit or low-quality products.

Related Article: Varicose Veins in Bodybuilders: Risk Factors, Diagnosis and Management

Warning and Legal Considerations

  • Legality: The legality of purchasing and using AAS varies by country. In many places, it is illegal to buy AAS without a prescription. Always check local laws before purchasing.
  • Health Risks: Using AAS without medical supervision can lead to severe health issues. It's crucial to consult with a healthcare provider before starting any steroid regimen.
  • Ethical Considerations: Consider the ethical implications of using AAS, especially in competitive sports where their use is often banned.

Conclusion

While there are ways to find and verify the quality of AAS online, it's essential to approach this with caution, awareness of the legal landscape, and a focus on health and safety. Overall, your joint health while on AAS should be a first priority so your training is not hindered.

Click Here to Buy Nandro D by Spectrum

Continue Reading

Anabolic Steroids

How Much Do You Know About B-AET? A Fat Burner You’ve Been Missing

Published

on

By

Introduction to B-AET

B-AET, or Beta-Androstenetriol, is a DHEA derivative known for its impressive health benefits, including anti-catabolism and fat loss. Despite its advantages, it remains largely unknown because it is hard to obtain, not due to any significant drawbacks.

Let’s delve into its properties:

Anti-Catabolic Effects: B-AET helps prevent muscle breakdown (catabolism). By preserving muscle tissue during intense workouts or calorie deficits, it supports overall fitness goals.

Fat Loss Potential: B-AET may enhance fat loss. While the exact mechanisms aren’t fully understood, it likely influences metabolism and fat utilization.

Challenges with Availability: As we've mentioned, B-AET is not widely accessible. Its scarcity limits research and popularity.

Comparing B-AET to 7-KETO DHEA

Similar to 7-KETO DHEA, B-AET does not suppress the HPTA and promotes fat loss by inhibiting cortisol. Based on personal experience, B-AET offers superior results compared to 7-KETO DHEA.

Must Read: 10 Week Program & 5,000 Rep Arm Specialization Program

Understanding Cortisol’s Role in Fat-Loss

Cortisol, released in response to stress, was crucial for survival in our evolutionary past. However, in today's world, chronic stress leads to persistently high cortisol levels, contributing to various health issues including fat accumulation, especially around the abdomen, insulin resistance, muscle loss, increased blood pressure, weakened immunity, impaired memory, decreased bone density, inhibited collagen synthesis, hair loss, depression, and lower testosterone levels.

Benefits of Beta-Androstenetriol

B-AET helps with fat loss by inhibiting cortisol production through the suppression of the enzyme 11β-HSD1. Users often notice significant fat reduction, especially around the lower belly. Additionally, B-AET lowers overall stress, enhances immune function, prevents muscle loss during calorie restriction, and has anti-inflammatory properties.

B-AET helps prevent muscle breakdown during intense training, preserving your hard-earned muscle mass.

By supporting muscle preservation and potentially aiding fat loss, B-AET can optimize overall performance during cutting phases.

Potential Side-Effects of Beta-Androstenetriol

Data on B-AET’s side effects is limited. Anecdotal reports suggest minimal side effects, but overuse could potentially lead to decreased stress response, fatigue, and low blood pressure due to chronically low cortisol levels. However, these risks are minimal if B-AET is used properly.

Let’s explore the potential dangers associated with Beta-Androstenetriol (B-AET) in detail:

Limited Research: As mentioned, B-AET remains relatively unknown due to limited research. Lack of comprehensive studies makes it challenging to fully understand its safety profile and potential risks.

Individual Variability: As with any compound, individual responses can vary. What works well for one person may not be suitable for another. Always consider your unique physiology and consult a healthcare professional.

Potental Side Effects

Gastrointestinal Disturbances: Some peptides can affect the digestive system, leading to nausea, vomiting, diarrhea, or stomach discomfort. While these side effects are typically transient, they’re worth noting.

Appetite and Blood Sugar: GHS peptides (including B-AET) may increase appetite and blood sugar levels.

Fluid Retention: Fluid retention is another possible side effect.

Legal Status: B-AET’s legal status varies by region. Ensure compliance with local regulations and restrictions.

Dosage and How to Use B-AET

Click Here to Buy TB-500 10 mg by Magnus Pharma

B-AET can be taken orally or applied topically. Due to poor bioavailability when taken orally, the topical application is far more effective and may offer localized benefits. Let’s explore dosage and usage in detail.

Dosage

Unfortunately, there isn’t a universally established dosage for B-AET due to limited research and availability.

If you decide to use it, start with a conservative dose and gradually increase if needed.

Consult a healthcare professional or a knowledgeable coach who understands peptide usage.

Usage

B-AET is typically administered via subcutaneous injections.

Follow these general guidelines:

Frequency: Inject once or twice daily.

Timing: Some users prefer morning injections to align with natural cortisol rhythms.

Cycle Duration: Cycles can vary from a few weeks to several months.

Stacking: B-AET can be stacked with other peptides or compounds for synergistic effects.

Always:

Rotate Injection Sites: Avoid injecting in the same spot repeatedly.

Reconstitute Properly: If using lyophilized powder, follow reconstitution instructions.

Store Correctly: Keep B-AET refrigerated to maintain stability.

Other Fat-burning Alternatives to Consider

Also Read: 5 Steroid Cycles for Beginners

As a bodybuilder looking to optimize fat loss, consider incorporating the following peptides into your regimen:

Amlexanox

Function: Originally used for oral ulcers, Amlexanox has shown potential for fat loss. It activates an enzyme called AMP-activated protein kinase (AMPK), which plays a role in energy regulation and fat metabolism.

Mechanism: By enhancing AMPK activity, Amlexanox promotes fat breakdown (lipolysis) and inhibits fat storage (lipogenesis).

Administration: Available as a topical gel or oral medication.

Note: Research is ongoing, and its effectiveness for bodybuilders specifically needs further investigation.

Click Here to Buy Amlogard 5 mg by Indian Pharmacy

Glycyrrhetinic Acid

Function: Derived from licorice root, Glycyrrhetinic acid has anti-inflammatory properties and may aid fat loss.

Mechanism: It inhibits an enzyme called 11-beta-hydroxysteroid dehydrogenase, which affects fat distribution.

Administration: Often used in topical creams or as a supplement.

Caution: High doses can lead to side effects, so moderation is crucial.

Tesofensine

Function: Tesofensine was initially developed as an anti-obesity drug.

Mechanism: It increases levels of neurotransmitters like serotonin, dopamine, and norepinephrine, leading to reduced appetite and increased fat burning.

Administration: Oral tablets.

Note: Not widely available due to limited research and regulatory hurdles.

AOD9604

Function: AOD9604 is a modified fragment of human growth hormone (HGH).

Mechanism: It stimulates lipolysis (fat breakdown) without affecting blood sugar levels or muscle growth.

Administration: Typically injected.

Caution: Consult a healthcare professional before use.

5-Amino-1MQ

Function: 5-Amino-1MQ is a novel compound with potential fat-burning effects.

Mechanism: It interacts with mitochondria, enhancing energy expenditure and fat oxidation.

Availability: Limited due to being a newer discovery.

Overall

When it comes to burning fat in bodybuilding, a combination of heavy training and cardio is effective. Heavy weights help build muscle and improve strength, while cardio aids in fat loss. Additionally, consider incorporating fat-burning exercises into your routine.

However, if you can lay hands on B-AET and safely, it might just be the product you have been looking for. Good luck as you embark on a journey to get rid of that extra fat.

Related Article: First Injectable Steroid Cycle

Continue Reading

Anabolic Steroids

Peptides Vs. Steroids:Real Talk/Guide

Published

on

By

Many bodybuilders are unable to distinguish peptides from regular steroids. In this article we're going to explore Peptides vs. Steroids from various perspectives.

Let’s delve into the differences between peptides and steroids.

Mechanism of Action

    • Peptides: These are short chains of amino acids. Peptides work by binding to specific receptors on the cell surface. They initiate signal transduction pathways, which activate various cellular processes. Peptides do not directly affect DNA or gene expression.
    • Steroids: Steroids, on the other hand, penetrate the cell membrane and bind directly to DNA within the cell nucleus. They act as transcription participants, modifying gene expression.

Natural vs. Unnatural Effects

    • Peptides: Peptides enhance natural processes in the body. For example, some peptides stimulate growth hormone release, improve recovery, and promote anti-aging effects.
    • Steroids: Anabolic steroids artificially increase testosterone levels. They can be used for hormone replacement therapy but may have side effects due to their unnatural impact on the body.

Related Article: Oral Primobolan Cycle 

Binding Sites

    • Peptides: Bind to cell surface receptors.
    • Steroids: Bind to receptors inside the cell cytoplasm and modify transcription.

Applications

    • Peptides:
      • Weight Loss: Certain peptides can aid weight management.
      • Recovery & Repair: Peptides like BPC-157 support tissue healing.
      • Anti-Aging: Some peptides have skin-rejuvenating properties.
      • Reproductive Health: Peptides like kisspeptin-10 may impact reproductive health.
      • Cognitive Enhancement: Selank and semax are nootropic peptides.
    • Steroids:
      • Hormone Replacement: Used for male hypogonadism (low testosterone).
      • Muscle Building: Anabolic steroids promote muscle growth.
      • Performance Enhancement: Athletes sometimes misuse steroids for performance gains.

Peptides Vs. Steroids Risk Profile

    • Peptides: Generally considered safer with fewer side effects.
    • Steroids: Higher risk of adverse effects, including liver damage, cardiovascular issues, and hormonal imbalances.

Peptides Vs. Steroids Dosages

Peptides

Dosages vary based on the specific peptide and desired effect.

Let’s explore the dosages for various peptides commonly used in bodybuilding. Remember that individual responses may vary, so always consult with a healthcare professional before starting any peptide regimen.

CJC-1295 and Ipamorelin Stack

CJC-1295

Typical Dosage: 1000 mcg to 2000 mcg per week.

Cycle Duration: 8 to 12 weeks (60 to 90 days).

Ipamorelin

Typical Dosage: 200 mcg to 300 mcg per day.

Cycle Duration: Similar to CJC-1295 (8 to 12 weeks).

Average Cost: Approximately $49 (Prices may vary depending on the supplier and product concentration).

GHRP-6

Typical Dosage: 4-10 mg per week, divided into two doses per week.

Cycle Duration: 4-6 weeks, followed by a maintenance dose.

Benefits: GHRP-6 stimulates growth hormone release, aiding muscle growth and recovery.

BPC-157

Typical Dosage: Varies based on the specific purpose (e.g., injury recovery or muscle healing).

Cycle Duration: Often used for 4-6 weeks.

Application: BPC-157 accelerates tissue repair and supports muscle healing.

IGF-1 (Insulin-like Growth Factor)

Dosage: Typically administered subcutaneously.

Cycle Duration: Varies; consult with your personal trainer or healthcare professional.

Benefits: IGF-1 promotes local muscle growth and repair.

Steroids

Dosages depend on the steroid type and purpose (e.g., medical or athletic use).

Click Here to Buy EnanTREX ® 350 mg/ml by Concentrex

Let’s dive into a comprehensive guide on steroid dosages for bodybuilding. Keep in mind that individual responses can vary, and it’s crucial to consult with a healthcare professional before starting any steroid regimen. Here are some common dosages for various steroids

Must Read: Beginner Bulking Cycle

Beginner Steroid Cycles

Testosterone Cycle

Dosage: Typically ranges from 300 mg to 500 mg per week.

Cycle Length: Usually 8 to 12 weeks.

Rest Period: Allow at least 4 to 6 weeks between cycles.

Anavar (Oxandrolone) Cycle

Dosage: Around 20 mg to 50 mg per day.

Cycle Length: 6 to 8 weeks.

Purpose: Anavar is mild and suitable for beginners, promoting lean muscle gains and fat loss2.

Bulking Steroid Cycles

Dianabol (Methandrostenolone) Cycle

Dosage: Typically 20 mg to 50 mg per day.

Cycle Length: 4 to 6 weeks.

Benefits: Dianabol is known for rapid muscle growth and strength gains.

Anadrol (Oxymetholone) Cycle

Dosage: 50 mg to 100 mg per day.

Cycle Length: 4 to 6 weeks.

Purpose: Anadrol is potent for bulking and increasing red blood cell production.

Trenbolone Cycle

Dosage: Varies (typically 200 mg to 400 mg per week).

Cycle Length: 8 to 10 weeks.

Benefits: Trenbolone promotes muscle growth, strength, and fat loss.

Deca Durabolin (Nandrolone Decanoate) Cycle

Dosage: 200 mg to 400 mg per week.

Cycle Length: 8 to 12 weeks.

Stacking: Often combined with testosterone for synergistic effects.

Cutting Steroid Cycles

Winstrol (Stanozolol) Cycle

Dosage: 20 mg to 50 mg per day (oral) or 50 mg to 100 mg every other day (injectable).

Cycle Length: 6 to 8 weeks.

Purpose: Winstrol helps preserve lean muscle during cutting phases.

Primobolan (Methenolone) Cycle

Dosage: 400 mg to 600 mg per week.

Cycle Length: 8 to 10 weeks.

Benefits: Primobolan is mild, promotes quality muscle, and has minimal side effects.

Clenbuterol Cycle

Dosage: Varies (typically 20 mcg to 120 mcg per day).

Cycle Length: 2 weeks on, 2 weeks off.

Purpose: Clenbuterol aids fat loss and enhances metabolism.

Advanced Steroid Cycles

Anadrol / Testosterone / Trenbolone Cycle

Dosages: Varies based on individual tolerance and goals.

Stacking: Combining Anadrol, testosterone, and trenbolone for maximum effects.

Winstrol / Proviron / Trenbolone Cycle

Dosages: Tailored to advanced users and pro bodybuilders.

Stacking: Winstrol, Proviron, and trenbolone synergize for cutting and hardening.

Click Here to Buy IGF-1 DES 1mg by Ultima Pharmaceuticals

Natural Alternatives

    • Peptides: Consider natural alternatives like collagen peptides for skin health or melatonin for sleep.
    • Steroids: Natural alternatives include resistance training, proper nutrition, and rest.

Peptides Vs. Steroids Impact on Muscle Growth

Peptides

Lean Muscle Gain: Peptides promote lean muscle mass by stimulating protein synthesis.

Recovery: Faster recovery from intense workouts and injuries.

Anti-Catabolic Effects: Peptides prevent muscle breakdown.

Example: Imagine an athlete recovering from a muscle strain. BPC-157 administration accelerates tissue repair, aiding muscle growth.

Steroids

Rapid Muscle Hypertrophy: Steroids lead to significant muscle growth due to increased protein synthesis.

Increased Strength: Athletes using steroids experience enhanced performance in strength-based activities.

Improved Recovery: Steroids reduce muscle damage and inflammation.

Example: A bodybuilder using testosterone sees substantial gains in muscle size and strength during a bulking phase.

FDA Stance on Peptides Vs. Steroids

The FDA has closely examined the commercialization and utilization of specific peptides and steroids, expressing apprehensions about their safety and the absence of approval for numerous substances.

As a result, the FDA has prohibited the sale of several peptides formerly favored by bodybuilders and fitness enthusiasts due to their purported muscle-building and performance-enhancing attributes.

This regulatory measure emphasizes the significance of following lawful and secure protocols when contemplating peptides for enhancing muscle growth.

It is crucial for individuals to remain well-informed regarding the peptides that adhere to FDA guidelines, enabling them to make prudent and lawful decisions concerning their health and fitness routines.

Importantly,  the legality of steroids and peptides varies among countries and jurisdictions. We recommend checking legality in your country before commencing your routine.

Also Read: Varicose Veins In Bodybuilders-Risk Factors and How to Mitigate Them

Overall

As observed, steroids and peptide therapies share certain similarities in their effects, including enhanced strength, improved endurance, and increased fat burning, which are often sought after by individuals aiming to enhance their physical performance and appearance.

However, while both can achieve these outcomes, the risks associated with steroids are considerably higher compared to peptides.

Fred Kyle, a Certified Peptide Specialist at the Etalaze, advises individuals to carefully consider the potential consequences of using steroids on their health before opting for them as a means to enhance performance.

For those seeking an extra boost to overcome performance plateaus or slumps, it's recommended to consult with a professional, preferably your personal trainer or physician.

Continue Reading
Advertisement CB_EN_250x300_USABanner_Bulking1

Trending Posts